UHF Connector Straight Male Crimp Cable Type – RHT-630-0122

Can be Customized for unique material or performance requirements
Designed for low-frequency systems from 0.6-300MHz
The threaded coupling mechanism is easy to assembly with high durability
Reduce your cost for simple spec demands

UHF connector is designed in World War II or earlier, and invented in the 1930s by Amphenol engineer Edward Clarke Quackenbush for use in the radio industry. The most popular cable plug and corresponding chassis-mount socket carry the old Signal Corps nomenclatures PL-259 (plug) and SO-239 (socket).

The UHF connector is a name for a threaded RF connector. UHF coax connectors reliably carry signals at frequencies up to 100 MHz with thread coupling. Widely used for Antennas, Military, Public Address Systems, Low-frequency applications, etc.

UHF connectors feature a threaded coupling. UHF connectors are economical and popularly used because of their ease of assembly. The UHF solderable screw-on termination feature requires no specialized crimping tools.

Interface

Application

Product Specification

RF Series	UHF Type
Connector Type	Plug
Orientation	Straight
Contact Type	Male Pin
Contact Termination Style	Crimp
Shield Termination	Crimp
Mounting Type	Cable Mount
Fastening Type	Threaded
Number of Ports	1
Impedance	50 ohm
Frequency - Max	300MHz
Shell Material	Copper Alloy
Shell Finish	Nickel Plated
Insulator Material	Teflon White
Contact Material	Brass
Contact Finish	Silver Plated
Insultation Resistance	5000 MΩ Min
Mating Durability	≥500 cycles (For Beryllium Copper Contact)
Rated Voltage	500 Volts Peak
Temperature Range	-55°C ~ +149°C (Mica-filled phenolic insulators), -55°C ~ +85°C (Copolymer of styrene and polystyrene), -65°C ~ +165°C (TFE insulators)
RF Series	UHF Type	Connector Type	Plug
Orientation	Straight	Contact Type	Male Pin
Contact Termination Style	Crimp	Shield Termination	Crimp
Mounting Type	Cable Mount	Fastening Type	Threaded
Number of Ports	1	Impedance	50 ohm
Frequency - Max	300MHz	Shell Material	Copper Alloy
Shell Finish	Nickel Plated	Insulator Material	Teflon White
Contact Material	Brass	Contact Finish	Silver Plated
Insultation Resistance	5000 MΩ Min	Mating Durability	≥500 cycles (For Beryllium Copper Contact)
Rated Voltage	500 Volts Peak	Temperature Range	-55°C ~ +149°C (Mica-filled phenolic insulators), -55°C ~ +85°C (Copolymer of styrene and polystyrene), -65°C ~ +165°C (TFE insulators)

RF Series	UHF Type
Connector Type	Plug
Orientation	Straight
Contact Type	Male Pin
Contact Termination Style	Crimp
Shield Termination	Crimp
Mounting Type	Cable Mount
Fastening Type	Threaded
Number of Ports	1
Impedance	50 ohm
Frequency - Max	300MHz
Shell Material	Copper Alloy
Shell Finish	Nickel Plated
Insulator Material	Teflon White
Contact Material	Brass
Contact Finish	Silver Plated
Insultation Resistance	5000 MΩ Min
Mating Durability	≥500 cycles (For Beryllium Copper Contact)
Rated Voltage	500 Volts Peak
Temperature Range	-55°C ~ +149°C (Mica-filled phenolic insulators), -55°C ~ +85°C (Copolymer of styrene and polystyrene), -65°C ~ +165°C (TFE insulators)

Renhotec Information

Where is your factory located? Can I visit your factory?

We have two factories, one is located in Dongguan city, another in Jiangmen city. Visitors are always welcome.

RF Connector Compatibility

Does the connector comply with international standards and is it interchangeable with similar products of other brands?

Yes, our RF connector interface dimension conform international standards. Normally it’s interchangeable with similar products of other brands, it’s better to send us the datasheet/sample of other brands for check before order.

Is this RF connector suitable for the PCB of our device?

We recommend that you provide us with detailed specifications of your existing interfaces and cables, performance requirement and usage environment, so that our technical team can evaluate them.

Will this RF connector fit well with my existing connector interfaces and cables?

Please advise your PCB layout dimension requirement, we’ll recommend you the most suitable Renhotec drawing for check.

Customization and Sample Testing

Can Renhotec customize high frequency RF connector? Such as SMA 0-18G.

Yes, we offer customization services to meet your specific needs. Please provide your specification, performance requirement or drawing, photos, or samples for evaluation.

For RF PCB connector, can center pin dimension be customized according to my requirement?

Yes, we provide customised services, it has MOQ requirement, please send your requirement for our engineer team evaluation.

Is the thread length can be customized? Such as SMA connector thread length.

Yes, please advise the thread length for evaluation.

Can you assembly cable base on our requirement?

Yes, we can. Please send us the datasheet or connector and cable requirement, we can produce as per request.

Can you customize according to my datasheet/drawing?

Yes, please share it and the requirement with us, our engineer team will evaluate it.

RF Connector Specifications

What's the impedance of RF connector?

The impedance of an RF connector typically refers to the characteristic impedance of the transmission line it supports. The most common characteristic impedances for RF connectors are 50 ohms and 75 ohms. Please select an RF connector with the appropriate characteristic impedance to ensure optimal signal transmission and minimal signal loss within the system.

Order Lead Time

What is the lead time and availability of these connectors?

Lead time depends on the product type, quantity, and production status. For items ready in stock, the lead time is 3-5 working days. For common items, the lead time for 10K is 10-12 working days. The accurate lead time can be provided once the order is confirmed.