UHF Connector Right Angle Jack Crimp Cable Type Bulkhead – RHT-630-0116
- Can be Customized for unique material or performance requirements
- Designed for low-frequency systems from 0.6-300MHz
- The threaded coupling mechanism is easy to assembly with high durability
- Reduce your cost for simple spec demands
UHF connector is designed in World War II or earlier, and invented in the 1930s by Amphenol engineer Edward Clarke Quackenbush for use in the radio industry. The most popular cable plug and corresponding chassis-mount socket carry the old Signal Corps nomenclatures PL-259 (plug) and SO-239 (socket).
The UHF connector is a name for a threaded RF connector. UHF coax connectors reliably carry signals at frequencies up to 100 MHz with thread coupling. Widely used for Antennas, Military, Public Address Systems, Low-frequency applications, etc.
UHF connectors feature a threaded coupling. UHF connectors are economical and popularly used because of their ease of assembly. The UHF solderable screw-on termination feature requires no specialized crimping tools.
Interface
Application
Product Specification
RF Series | UHF Type |
||
---|---|---|---|
Connector Type | Jack |
||
Orientation | Right Angle |
||
Contact Type | Female Pin |
||
Contact Termination Style | Crimp |
||
Shield Termination | Crimp |
||
Mounting Type | Cable Mount |
||
Mounting Feature | Bulkhead |
||
Fastening Type | Threaded |
||
Number of Ports | 1 |
||
Impedance | 50 ohm |
||
Frequency - Max | 300MHz |
||
Shell Material | Copper Alloy |
||
Shell Finish | Nickel Plated |
||
Insulator Material | Teflon White |
||
Contact Material | Brass |
||
Contact Finish | Gold Plated |
||
Insultation Resistance | 5000 MΩ Min |
||
Mating Durability | ≥500 cycles (For Beryllium Copper Contact) |
||
Rated Voltage | 500 Volts Peak |
||
Temperature Range | -55°C ~ +149°C (Mica-filled phenolic insulators), -55°C ~ +85°C (Copolymer of styrene and polystyrene), -65°C ~ +165°C (TFE insulators) |
||
RF Series | UHF Type |
Connector Type | Jack |
Orientation | Right Angle |
Contact Type | Female Pin |
Contact Termination Style | Crimp |
Shield Termination | Crimp |
Mounting Type | Cable Mount |
Mounting Feature | Bulkhead |
Fastening Type | Threaded |
Number of Ports | 1 |
Impedance | 50 ohm |
Frequency - Max | 300MHz |
Shell Material | Copper Alloy |
Shell Finish | Nickel Plated |
Insulator Material | Teflon White |
Contact Material | Brass |
Contact Finish | Gold Plated |
Insultation Resistance | 5000 MΩ Min |
Mating Durability | ≥500 cycles (For Beryllium Copper Contact) |
Rated Voltage | 500 Volts Peak |
Temperature Range | -55°C ~ +149°C (Mica-filled phenolic insulators), -55°C ~ +85°C (Copolymer of styrene and polystyrene), -65°C ~ +165°C (TFE insulators) |
RF Series | UHF Type |
---|---|
Connector Type | Jack |
Orientation | Right Angle |
Contact Type | Female Pin |
Contact Termination Style | Crimp |
Shield Termination | Crimp |
Mounting Type | Cable Mount |
Mounting Feature | Bulkhead |
Fastening Type | Threaded |
Number of Ports | 1 |
Impedance | 50 ohm |
Frequency - Max | 300MHz |
Shell Material | Copper Alloy |
Shell Finish | Nickel Plated |
Insulator Material | Teflon White |
Contact Material | Brass |
Contact Finish | Gold Plated |
Insultation Resistance | 5000 MΩ Min |
Mating Durability | ≥500 cycles (For Beryllium Copper Contact) |
Rated Voltage | 500 Volts Peak |
Temperature Range | -55°C ~ +149°C (Mica-filled phenolic insulators), -55°C ~ +85°C (Copolymer of styrene and polystyrene), -65°C ~ +165°C (TFE insulators) |
Renhotec Information
We have two factories, one is located in Dongguan city, another in Jiangmen city. Visitors are always welcome.
RF Connector Selection
Factors to consider include frequency range, impedance, insertion loss, durability, mating cycle, and environmental conditions. These factors are important to ensure optimal performance of Renhotec RF connectors.
Customization and Sample Testing
Yes, we offer customization services to meet your specific needs. Please provide your specification, performance requirement or drawing, photos, or samples for evaluation.
Absolutely, Renhotec provides samples for testing before proceeding with a bulk order.
Order Lead Time
Lead time depends on the product type, quantity, and production status. For items ready in stock, the lead time is 3-5 working days. For common items, the lead time for 10K is 10-12 working days. The accurate lead time can be provided once the order is confirmed.
Shipping and Packaging
For small quantities, we ship by express. For larger quantities, we ship by sea, air, railway, or truck.
Our standard packaging methods include blister box/polybag with label in a carton box. We can also package as per request.
Payment Methods
Accepted payment methods include T/T, Paypal, etc.
Quality Assurance
Yes, we can provide regular inspection reports. If you have a special requirement, please let us know.
👋Let us know how we can help
We look forward to hearing from you! We will respond within 24 hours.