SKU: RHT-QSFPDD-400G-LR4 Category: 400G Modules Tags: Optical Tranceiver, QSFPDD Module

Get a Quote

[yith_ywraq_button_quote]

QSFPDD-400G-LR4, 400G, 1310nm 10km DOC LC SMF Optical Transceiver Module

Q: Where is your factory located? Can I visit your factory?

We have two factories, one is located in Dongguan city, another in Jiangmen city. Visitors are always welcome.

Q: Does the connector comply with international standards and is it interchangeable with similar products of other brands?

Yes, our RF connector interface dimension conform international standards. Normally it’s interchangeable with similar products of other brands, it’s better to send us the datasheet/sample of other brands for check before order.

Q: Is this RF connector suitable for the PCB of our device?

We recommend that you provide us with detailed specifications of your existing interfaces and cables, performance requirement and usage environment, so that our technical team can evaluate them.

Q: Will this RF connector fit well with my existing connector interfaces and cables?

Please advise your PCB layout dimension requirement, we’ll recommend you the most suitable Renhotec drawing for check.

Q: Can Renhotec customize high frequency RF connector? Such as SMA 0-18G.

Yes, we offer customization services to meet your specific needs. Please provide your specification, performance requirement or drawing, photos, or samples for evaluation.

Q: For RF PCB connector, can center pin dimension be customized according to my requirement?

Yes, we provide customised services, it has MOQ requirement, please send your requirement for our engineer team evaluation.

Q: Is the thread length can be customized? Such as SMA connector thread length.

Yes, please advise the thread length for evaluation.

Q: Can you assembly cable base on our requirement?

Yes, we can. Please send us the datasheet or connector and cable requirement, we can produce as per request.

Q: Can you customize according to my datasheet/drawing?

Yes, please share it and the requirement with us, our engineer team will evaluate it.

Q: What's the impedance of RF connector?

The impedance of an RF connector typically refers to the characteristic impedance of the transmission line it supports. The most common characteristic impedances for RF connectors are 50 ohms and 75 ohms. Please select an RF connector with the appropriate characteristic impedance to ensure optimal signal transmission and minimal signal loss within the system.

High-speed data transfer rate of up to 400Gbps
Easy to install and compatible with a wide range of networking equipment
Energy-efficient with low power consumption
Long transmission distance of up to 100 meters over multimode fiber and up to 10 kilometers over single-mode fiber
High reliability for consistent performance over time
Supports multiple data rates, including 10Gbps, 25Gbps, 40Gbps, 50Gbps, 100Gbps, 200Gbps, and 400Gbps

Renhotec QSFPDD 400Gb Modules

Renhotec QSFPDD 400Gb Modules are high-speed, hot-pluggable optical transceivers designed for use in 400 Gigabit Ethernet and other high-speed networking applications. They support data rates up to 400Gbps and can operate over a range of distances depending on the specific module. Renhotec QSFPDD 400Gb Modules are compatible with a wide range of networking equipment and are designed to meet or exceed industry standards for performance and reliability. They are available in various configurations to suit different networking needs, including single-mode and multi-mode fiber options, and can be customized to meet specific requirements.

Connectivity Solution

Features

400G Connectivity & Low-Power

The Optical Transceiver provides fast and reliable 400G connectivity in data center environments. Its low power consumption feature makes it an energy-efficient option for large-scale data center environments, reducing power costs and minimizing environmental impact.

Strict Quality Control Requirements

Renhotec follows strict quality control requirements to ensure the reliable performance of its optical modules. By adhering to these requirements, they can provide high-quality products that meet the needs of their customers and provide reliable performance over an extended period.

Specifications

Compatible Brands	Cisco, Huawei, ZTE, HP
Form Factor	QSFPDD
Max Data Rate	400Gbps
Wavelength	1310nm
Max Cable Distance	10km
Connector	Duplex LC
DOM/DDM	Supported
Mode	Single Mode
Transmitter Type	CWDM EML
Receiver Type	PIN
TX Power	-2.8~4.0dBm
Receiver Sensitivity	<-9.1dBm
Protocols	QSFP-DD MSA

Compatible Brands	Cisco, Huawei, ZTE, HP
Form Factor	QSFPDD
Max Data Rate	400Gbps
Wavelength	1310nm
Max Cable Distance	10km
Connector	Duplex LC
DOM/DDM	Supported
Mode	Single Mode
Transmitter Type	CWDM EML
Receiver Type	PIN
TX Power	-2.8~4.0dBm
Receiver Sensitivity	<-9.1dBm
Protocols	QSFP-DD MSA

Renhotec Information

Where is your factory located? Can I visit your factory?

We have two factories, one is located in Dongguan city, another in Jiangmen city. Visitors are always welcome.

RF Connector Compatibility

Does the connector comply with international standards and is it interchangeable with similar products of other brands?

Yes, our RF connector interface dimension conform international standards. Normally it’s interchangeable with similar products of other brands, it’s better to send us the datasheet/sample of other brands for check before order.

Is this RF connector suitable for the PCB of our device?

We recommend that you provide us with detailed specifications of your existing interfaces and cables, performance requirement and usage environment, so that our technical team can evaluate them.

Will this RF connector fit well with my existing connector interfaces and cables?

Please advise your PCB layout dimension requirement, we’ll recommend you the most suitable Renhotec drawing for check.

Customization and Sample Testing

Can Renhotec customize high frequency RF connector? Such as SMA 0-18G.

Yes, we offer customization services to meet your specific needs. Please provide your specification, performance requirement or drawing, photos, or samples for evaluation.

For RF PCB connector, can center pin dimension be customized according to my requirement?

Yes, we provide customised services, it has MOQ requirement, please send your requirement for our engineer team evaluation.

Is the thread length can be customized? Such as SMA connector thread length.

Yes, please advise the thread length for evaluation.

Can you assembly cable base on our requirement?

Yes, we can. Please send us the datasheet or connector and cable requirement, we can produce as per request.

Can you customize according to my datasheet/drawing?

Yes, please share it and the requirement with us, our engineer team will evaluate it.

RF Connector Specifications

What's the impedance of RF connector?

The impedance of an RF connector typically refers to the characteristic impedance of the transmission line it supports. The most common characteristic impedances for RF connectors are 50 ohms and 75 ohms. Please select an RF connector with the appropriate characteristic impedance to ensure optimal signal transmission and minimal signal loss within the system.

Order Lead Time

What is the lead time and availability of these connectors?

Lead time depends on the product type, quantity, and production status. For items ready in stock, the lead time is 3-5 working days. For common items, the lead time for 10K is 10-12 working days. The accurate lead time can be provided once the order is confirmed.