BNC Connector Twist On Straight Male Plug RG6 Cable 50 Ohm – RHT-610-0073

Easily connect your devices with the BNC Connector Twist On Straight Male Plug, suitable for RG6 cable with 50 Ohm impedance. This connector ensures a secure and reliable connection for optimal signal transmission. SKU: RHT-610-0073

The BNC connector RG6 (an initialism of Bayonet Neill CConcelman) is a miniature quick connect/disconnect radio frequency connector. BNC connectors are most commonly made in 50 and 75 ohm versions. Matched for use with cables of the same characteristic impedance.BNC RF connectors isolate the video input signal, reducing mutual interference between signals and increasing signal bandwidth to get the best signal response. Because the coaxial cable is a shielded cable with the advantages of long transmission distance and signal stability. BNC RF Connectors are now also used in a large number of communication systems.

Application Scenarios

Product Specification

RF Series	BNC Type
Connector Type	Plug
Contact Type	Male Pin
Orientation	Straight
Fastening Type	Bayonet
Number of Ports	1
Contact Termination Style	Crimp
Shield Termination	Clamp
Impedance	50 ohm
Mounting Type	Cable Mount
Insulator Material	Teflon White
Shell Material	Zinc Alloy
Shell Finish	Nickel Plated
Contact Material	Copper Alloy
Contact Finish	Gold Plated
Frequency Range	0~4 GHz for 50 ohm
VSWR	R/A type ≦ 1.30/3GHz, Straight type ≦ 1.22/3GHz
Dielectric Withstanding Voltage	1500 V rms
Working Voltage	500 V rms
Center Contact Resistance	≦ 1.5 MΩ (Milliohms Max.)
Outer Contact Resistance	≦ 2.0 MΩ (Milliohms Max.)
Insultation Resistance	≧ 5 × 10³ MΩ (Milliohms min.)
Mating Durability	≥ 500 Cycles
Environmental Characteristics	POM -40℃~+60℃, Teflon -55℃~+155℃
RF Series	BNC Type	Connector Type	Plug
Contact Type	Male Pin	Orientation	Straight
Fastening Type	Bayonet	Number of Ports	1
Contact Termination Style	Crimp	Shield Termination	Clamp
Impedance	50 ohm	Mounting Type	Cable Mount
Insulator Material	Teflon White	Shell Material	Zinc Alloy
Shell Finish	Nickel Plated	Contact Material	Copper Alloy
Contact Finish	Gold Plated	Frequency Range	0~4 GHz for 50 ohm
VSWR	R/A type ≦ 1.30/3GHz, Straight type ≦ 1.22/3GHz	Dielectric Withstanding Voltage	1500 V rms
Working Voltage	500 V rms	Center Contact Resistance	≦ 1.5 MΩ (Milliohms Max.)
Outer Contact Resistance	≦ 2.0 MΩ (Milliohms Max.)	Insultation Resistance	≧ 5 × 10³ MΩ (Milliohms min.)
Mating Durability	≥ 500 Cycles	Environmental Characteristics	POM -40℃~+60℃, Teflon -55℃~+155℃

RF Series	BNC Type
Connector Type	Plug
Contact Type	Male Pin
Orientation	Straight
Fastening Type	Bayonet
Number of Ports	1
Contact Termination Style	Crimp
Shield Termination	Clamp
Impedance	50 ohm
Mounting Type	Cable Mount
Insulator Material	Teflon White
Shell Material	Zinc Alloy
Shell Finish	Nickel Plated
Contact Material	Copper Alloy
Contact Finish	Gold Plated
Frequency Range	0~4 GHz for 50 ohm
VSWR	R/A type ≦ 1.30/3GHz, Straight type ≦ 1.22/3GHz
Dielectric Withstanding Voltage	1500 V rms
Working Voltage	500 V rms
Center Contact Resistance	≦ 1.5 MΩ (Milliohms Max.)
Outer Contact Resistance	≦ 2.0 MΩ (Milliohms Max.)
Insultation Resistance	≧ 5 × 10³ MΩ (Milliohms min.)
Mating Durability	≥ 500 Cycles
Environmental Characteristics	POM -40℃~+60℃, Teflon -55℃~+155℃

Renhotec Information

Where is your factory located? Can I visit your factory?

We have two factories, one is located in Dongguan city, another in Jiangmen city. Visitors are always welcome.

RF Connector Compatibility

Does the connector comply with international standards and is it interchangeable with similar products of other brands?

Yes, our RF connector interface dimension conform international standards. Normally it’s interchangeable with similar products of other brands, it’s better to send us the datasheet/sample of other brands for check before order.

Is this RF connector suitable for the PCB of our device?

We recommend that you provide us with detailed specifications of your existing interfaces and cables, performance requirement and usage environment, so that our technical team can evaluate them.

Will this RF connector fit well with my existing connector interfaces and cables?

Please advise your PCB layout dimension requirement, we’ll recommend you the most suitable Renhotec drawing for check.

Customization and Sample Testing

Can Renhotec customize high frequency RF connector? Such as SMA 0-18G.

Yes, we offer customization services to meet your specific needs. Please provide your specification, performance requirement or drawing, photos, or samples for evaluation.

For RF PCB connector, can center pin dimension be customized according to my requirement?

Yes, we provide customised services, it has MOQ requirement, please send your requirement for our engineer team evaluation.

Is the thread length can be customized? Such as SMA connector thread length.

Yes, please advise the thread length for evaluation.

Can you assembly cable base on our requirement?

Yes, we can. Please send us the datasheet or connector and cable requirement, we can produce as per request.

Can you customize according to my datasheet/drawing?

Yes, please share it and the requirement with us, our engineer team will evaluate it.

RF Connector Specifications

What's the impedance of RF connector?

The impedance of an RF connector typically refers to the characteristic impedance of the transmission line it supports. The most common characteristic impedances for RF connectors are 50 ohms and 75 ohms. Please select an RF connector with the appropriate characteristic impedance to ensure optimal signal transmission and minimal signal loss within the system.

Order Lead Time

What is the lead time and availability of these connectors?

Lead time depends on the product type, quantity, and production status. For items ready in stock, the lead time is 3-5 working days. For common items, the lead time for 10K is 10-12 working days. The accurate lead time can be provided once the order is confirmed.