BNC Connector Right Angle Jack Bulkhead 50 Ohm 15.8mm – RHT-610-0037

Enhance your RF connections with this high-quality BNC Connector. The right angle jack design and 50 ohm impedance ensure reliable signal transmission. With a compact size of 15.8mm, this bulkhead connector is a versatile choice for various applications.

The BNC connector (an initialism of Bayonet Neill CConcelman) is a miniature quick connect/disconnect radio frequency connector. BNC bulkhead connectors are most commonly made in 50 and 75 ohm versions. Matched for use with cables of the same characteristic impedance.BNC RF connectors isolate the video input signal, reducing mutual interference between signals and increasing signal bandwidth to get the best signal response. Because the coaxial cable is a shielded cable with the advantages of long transmission distance and signal stability. BNC RF Connectors are now also used in a large number of communication systems.

Application Scenarios

Product Specification

RF Series	BNC Type
Connector Type	Jack
Contact Type	Female Pin
Orientation	Right Angle
Fastening Type	Bayonet
Number of Ports	1
Impedance	50 ohm
Mounting Type	Panel Mount
Mounting Feature	Bulkhead
Insulator Material	Teflon White
Shell Material	Zinc Alloy
Shell Finish	Nickel Plated
Contact Material	Copper Alloy
Contact Finish	Gold Plated
Frequency Range	0~4 GHz for 50 ohm
VSWR	R/A type ≦ 1.30/3GHz, Straight type ≦ 1.22/3GHz
Dielectric Withstanding Voltage	1500 V rms
Working Voltage	500 V rms
Center Contact Resistance	≦ 1.5 MΩ (Milliohms Max.)
Outer Contact Resistance	≦ 2.0 MΩ (Milliohms Max.)
Insultation Resistance	≧ 5 × 10³ MΩ (Milliohms min.)
Mating Durability	≥ 500 Cycles
Environmental Characteristics	POM -40℃~+60℃, Teflon -55℃~+155℃
RF Series	BNC Type	Connector Type	Jack
Contact Type	Female Pin	Orientation	Right Angle
Fastening Type	Bayonet	Number of Ports	1
Impedance	50 ohm	Mounting Type	Panel Mount
Mounting Feature	Bulkhead	Insulator Material	Teflon White
Shell Material	Zinc Alloy	Shell Finish	Nickel Plated
Contact Material	Copper Alloy	Contact Finish	Gold Plated
Frequency Range	0~4 GHz for 50 ohm	VSWR	R/A type ≦ 1.30/3GHz, Straight type ≦ 1.22/3GHz
Dielectric Withstanding Voltage	1500 V rms	Working Voltage	500 V rms
Center Contact Resistance	≦ 1.5 MΩ (Milliohms Max.)	Outer Contact Resistance	≦ 2.0 MΩ (Milliohms Max.)
Insultation Resistance	≧ 5 × 10³ MΩ (Milliohms min.)	Mating Durability	≥ 500 Cycles
Environmental Characteristics	POM -40℃~+60℃, Teflon -55℃~+155℃

RF Series	BNC Type
Connector Type	Jack
Contact Type	Female Pin
Orientation	Right Angle
Fastening Type	Bayonet
Number of Ports	1
Impedance	50 ohm
Mounting Type	Panel Mount
Mounting Feature	Bulkhead
Insulator Material	Teflon White
Shell Material	Zinc Alloy
Shell Finish	Nickel Plated
Contact Material	Copper Alloy
Contact Finish	Gold Plated
Frequency Range	0~4 GHz for 50 ohm
VSWR	R/A type ≦ 1.30/3GHz, Straight type ≦ 1.22/3GHz
Dielectric Withstanding Voltage	1500 V rms
Working Voltage	500 V rms
Center Contact Resistance	≦ 1.5 MΩ (Milliohms Max.)
Outer Contact Resistance	≦ 2.0 MΩ (Milliohms Max.)
Insultation Resistance	≧ 5 × 10³ MΩ (Milliohms min.)
Mating Durability	≥ 500 Cycles
Environmental Characteristics	POM -40℃~+60℃, Teflon -55℃~+155℃

Renhotec Information

Where is your factory located? Can I visit your factory?

We have two factories, one is located in Dongguan city, another in Jiangmen city. Visitors are always welcome.

RF Connector Selection

What factors should I consider when choosing an RF connector?

Factors to consider include frequency range, impedance, insertion loss, durability, mating cycle, and environmental conditions. These factors are important to ensure optimal performance of Renhotec RF connectors.

Customization and Sample Testing

Can Renhotec customize products for us?

Yes, we offer customization services to meet your specific needs. Please provide your specification, performance requirement or drawing, photos, or samples for evaluation.

Can you provide samples for testing?

Absolutely, Renhotec provides samples for testing before proceeding with a bulk order.

Order Lead Time

What is the lead time and availability of these connectors?

Lead time depends on the product type, quantity, and production status. For items ready in stock, the lead time is 3-5 working days. For common items, the lead time for 10K is 10-12 working days. The accurate lead time can be provided once the order is confirmed.